Skip Menu

Return to Skip Menu

Main Navigation

Return to Skip Menu

Main Content

Spring Lawn Fertilization—Getting it Right!

Refresh: Needs Flash: Flash MP3 Player
This podcast describes the steps in choosing and applying fertilizers to lawns in ways that result in a healthy, great looking lawn. Particular emphasis is placed on the selection of nitrogen sources that best suit the homeowner's needs.
    Spring Lawn Fertilization—Getting it Right!

Transcript

As temperatures warm there is an urge by most homeowners to do something in their lawn. Heck, most even enjoy the first few mowings of the spring and the smell and look of freshly cut turf (unfortunately, you won’t feel that way later this summer). There also is immediate emphasis on getting the turf greened up and one of the quickest ways to do this is to fertilize. However, there are right ways and wrong ways to go about spring fertilization. The Fertilizer Institute has a great phrase regarding fertilizer applications: right rate, right place, right product, right time. Let’s review the right steps in spring fertilization.

Don’t guess—soil test. There is no better money spent than to have a soil test done on the lawn and garden areas at least every third year. A soil test is the only way to determine if the soil needs lime, phosphorus (P) or potassium (K). Apply nutrients as recommended by a soil test and you’ll be taking a huge first step towards protecting water quality.

Nitrogen gets the most attention. The one nutrient that won’t be analyzed in a soil test is nitrogen (N). That is surprising since N is the focal point of lawn fertility programs. The reason is that N levels change rapidly in a soil and test results usually have little meaning by the time you receive the report. The test results will provide recommendations on appropriate N application levels suitable for the grass and location.

Spring is one of the trickiest times to optimize N fertility. Cool-season grasses have their most significant period of root development in the spring, so some N is beneficial. High rates of N promote a lush, dark green lawn, but there is too much emphasis on shoot growth rather than roots, and this often leads to serious problems with disease, insects, or drought later in the year. Warm-season grasses don’t initiate much root growth until after shoot greening is complete, so the ideal scenario is to wait at least until 50-75% green-up before applying N. Excessive spring N fertilization that promotes a lot of shoot growth can be disastrous to the turf if there is a late freeze.

Choosing a N source. When selecting a fertilizer for the spring take a close look at the fertilizer label. It tells exactly what nutrients are contained in the product on a percent by weight basis and indicates the N release rate. Most garden fertilizers typically contain large amounts each of N, P, and K (e.g. 10-10-10, 19-19-19, etc.). The N in these sources is almost always entirely water soluble (WSN) and provides quick plant response. Specialty lawn fertilizers contain high N percentages and lower levels of P and K (e.g. 29-3-7). This doesn’t mean the P and K aren’t needed by the plant, but history and experience show that repeated applications of garden fertilizers over the years by many homeowners results in soils testing high to very high in P and K. Unnecessary applications of P and K over time can ultimately result in water quality concerns (from excessive P) and nutrient imbalance (likely from excessive K).

Specialty lawn fertilizers also often contain different forms of N that provide varying N-release rates and the label indicates the percentages of both WSN and water insoluble N (WIN) making up the total % N in the product. Organic fertilizers are usually very low N analyses (6-10% by weight) and are mostly WIN (often up to 85% of the total N). The higher the % WIN the more slowly available the N is to the plant by way of chemical and microbial reactions in the soil. Any source containing 50% or more WIN can be safely applied at higher application rates with minimal concern for nutrient leaching. However, understand this -- the plant does not care what the source is, only that its needs are met with appropriate application levels and timing.

So how much N? The level of N depends on the fertilizer source, the grass, and where you reside. However, here are some basic guidelines. Fertilizer sources that contain more than 50% WIN can be applied up to 1.5 lbs N/1000 sq ft; those that are predominantly WSN should be applied at no more than 1 lb N/1000 sq ft. Recommended N levels from now through the end of May on cool-season grasses should not exceed a total of 1.5 lbs/1000 sq ft for Kentucky bluegrass, tall fescue, or perennial ryegrass, and no more than 1 lb for fine-leaf fescue. The rest of the recommended seasonal N fertility shouldn’t be applied until this fall. For warm-season grasses, allow some greening to occur before applying N, and resist the temptation to initiate standard N fertility programs of up to 1 lb N/1000 sq ft until the average last frost date has passed. Finally, consider that zoysiagrass and centipdegrass perform best at 1-2 lbs N/1000 sq ft total per year, whereas bermudagrass and St. Augustinegrass can safely receive up to 3-4 lbs total.

Final tips. Any fertilizer, regardless of its cost or its composition, is an environmental concern if it ends up on hardscapes. Keep fertilizers and other chemicals in the turf and water quality is protected. Your local Virginia Cooperative Extension office can provide more details on best management practices specific to your area. Contact them or visit the VCE website at www.ext.vt.edu to learn more about doing things right in your lawn and landscape.

About this File

Author:Mike Goatley
Release Date: March 17, 2014
Length: 06:33
Link: Spring Lawn Fertilization—Getting it Right! (MP3 | 3MB)




Did you find this information useful?


Tags